Product Description
Ignition coil, complete with HT lead and plug cap.
Fits:
Cadwell 125 Euro 3 model only.
We recommend a simple resistance check prior to replacing. If the following values are what you measure on your original coil, then it probably is not faulty.
Low tension (spade terminal to mounting bosses - approx. 1 ohm
Unscrew the HT lead from the coil - measure the resistance from the HT connection at the coil to the mounting boss - approx. 4000 - 4500 ohms
From the coil end of the HT lead to the spark connection in the plug cap - in the order of 4700 ohms.