Product Description
Clutch diaphragm spring compressor.
You will need this tool if you are removing the clutch diaphragm spring or replacing the large circlip.
Fits:
Starmaker
All Stormer models
Instructions:
The tool pulls on the operating pin, not pushes on it.
1) Rotate the clutch tool outer ring until the ring rests in the part of the tool shank with no threads.
2) Hold the operating pin with your fingers and screw the T bar shank of the tool onto the operating pin.
3) Hold the outer ring of the tool and rotate the T bar anti-clockwise to engage the shank thread and start compressing the diaphragm spring.
4) Keep turning the T bar anti-clockwise until the spring is compressed enough to release pressure on the diaphragm spring retaining circlip.
Caution: Do not pull the spring too far, as you may damage the spring or pop it inside out.
